TP-Link Tapo A200 - Page 3

2. Install Adjustable Bracket
Install the adjustable
bracket on the back of
the solar panel and
tighten the xing screw.
1. Detach Bracket
Loosen the adjustable
screw to detach the
mounting bracket and
adjustable bracket.
3. Drill Holes
Stick the mounting
template to the
desired location. Drill
three screw holes
according to the
template.
4. Install Mounting Bracket
Insert three mounting
anchors into the holes
and use the mounting
screws to ax the
bracket over the
anchors.
Φ=6 mm (15/64 in.)
2
Mount the Solar Panel