TP-Link TL-FC111PB-20 Installation Instructions

Scenario 1: Connect Devices with Optical Interfaces
LC-SC Fiber Cable
Ethernet Device
with Optical Interfaces
Media Converter
Fast Ethernet
100BASE-X (Fiber) Interface
IP Camera
AP
Powered Device (PD)
Note: The PoE Media Converter supplies steady power and data connectivity to a powered device such as PoE IP Camera and PoE AP through an Ethernet cable.
10/100Mbps WDM Media Converter with 1-Port PoE
Enlarge Your Ethernet Network
©2020 TP-Link 7106509098 REV1.0.0
LED Explanation
On: Power on
O:
Power o
PWR
PoE
On: Valid link
Flashing: Transmitting or receiving data
O: Invalid link
Link/Act
Package Contents: Converter, Power Adapter, Installation Guide
On: Supplying power normally
Flashing Slowly: No PD is connected
Flashing Quickly: Supplying power abnormally
O: No power supply
PWR PoE
Twisted-Pair Cable

TP-Link TL-FC111PB-20 Specifications

General

Maximum data transfer rate	100 Mbit/s
Wavelength	- nm
Maximum transfer distance	100 m
Fiber cable diameters supported (core/cladding)	9/125 µm
Internal	No
Product color	Black
LED indicators	Yes
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Fiber optic connector	SC
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Input current	0.5 A
Input voltage	48 V
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	73 mm
Width	94.5 mm
Height	27 mm