TP-Link TL-FC111PB-20

Scenario 1: Connect Devices with Optical Interfaces
LC-SC Fiber Cable
Ethernet Device
with Optical Interfaces
Media Converter
Fast Ethernet
100BASE-X (Fiber) Interface
IP Camera
AP
Powered Device (PD)
10/100Mbps WDM Media Converter with 1-Port PoE
Enlarge Your Ethernet Network
©2022 TP-Link 7106509686 REV2.0.0
LED Explanation
On: Power on
O:
Power o
PWR
PoE
On: Valid link
Flashing: Transmitting or receiving data
O: Invalid link
Link/Act
Package Contents: Converter, Power Adapter, Installation Guide
On: Supplying power normally
O: Supplying power abnormally or no power supply
PWR PoE
Twisted-Pair Cable
Note:
• The maximum output power of TL-FC111PB-20 is 15.4W. PoE devices that require more than 15.4W are not supported.
• The PoE Media Converter supplies steady power and data connectivity to a powered device such as PoE IP Camera and PoE AP.

TP-Link TL-FC111PB-20 Specifications

General

Maximum data transfer rate	100 Mbit/s
Wavelength	- nm
Maximum transfer distance	100 m
Fiber cable diameters supported (core/cladding)	9/125 µm
Internal	No
Product color	Black
LED indicators	Yes
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Fiber optic connector	SC
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Input current	0.5 A
Input voltage	48 V
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	73 mm
Width	94.5 mm
Height	27 mm

Summary

LED Indicators Explained

Power (PWR) LED Status

Details the ON state for power on and OFF state for power off.

LinkActivity (LinkAct) LED Status

Describes ON for valid link, Flashing for data transmission, and OFF for invalid link.

Power over Ethernet (PoE) LED Status

Indicates ON for normal power supply and OFF for abnormal or no power supply.

Scenario 1: Optical Interface Connectivity

PoE Power and Data Connectivity

Notes maximum 15.4W PoE output and steady power/data supply to devices like IP cameras.

Scenario 2: Non-Optical Interface Connectivity

Device Specifications

General Technical Specifications

Details standards, LEDs, connectors, cable types, transmission distance, wavelength, and PoE.

Environmental and Physical Parameters

Outlines operating and storage temperature ranges, and humidity conditions.

Important Safety Information