5
Chapter 1
Get to Know Your 4G LTE Router
Item Description
POWER Port For connecting the router to power socket via the provided power adapter.
LAN1, LAN2/WAN
For connecting to your PCs or other Ethernet network devices.
In wireless router mode, the LAN2/WAN port is used for connecting to a Cable/FTTH/
VDSL/ADSL device.
WPS/RESET
Press and hold this button until the Power LED starts flashing to reset the router to its
factory default settings.
To enable the WPS function, press this button about 2 seconds. If you have a WPS-
supported device, you can press this button to quickly establish connection between the
router and the client device.
Nano SIM Card Slot For holding the nano SIM card.
Antennas Used for data sessions over LTE. Upright them for the best mobile internet signal.
To Next Page
Loading...
