Installation Guide
Note:
1. The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE AP and PoE IP Phone through an Ethernet cable.
2. For TL-POE170S, plug the product into the wall outlets with earthing connection through the power supply cord.
PoE Injector
Connection
IP Camera AP IP Phone
Powered Device (PD)
PWR
PWR+DATA OUT DATA IN
Ethernet Device
(switch, router, etc.)
PoE+ Injector
Note:
For simplicity, we will take TL-POE160S for example in this Guide.
LED Explanation
On: Power on
O: Power o
PWR
On: Normal power supply
O: No powered device connected
Flashing: Abnormal power supply
PoE (Only for TL-POE170S)
© 2023 TP-Link
7106510148 REV1.2.0
To Next Page
Need help?
General
