TP-Link TL-POE160S - User Manual

To Next Page

Installation Guide

Note:

1. The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE AP and PoE IP Phone through an Ethernet cable.

2. For TL-POE170S, plug the product into the wall outlets with earthing connection through the power supply cord.

PoE Injector

Connection

IP Camera AP IP Phone

Powered Device (PD)

PWR

PWR+DATA OUT DATA IN

Ethernet Device

(switch, router, etc.)

PoE+ Injector

Note:

For simplicity, we will take TL-POE160S for example in this Guide.

LED Explanation

On: Power on

O: Power o

PWR

On: Normal power supply

O: No powered device connected

Flashing: Abnormal power supply

PoE (Only for TL-POE170S)

7106509317 REV1.1.0

Need help?

Do you have a question about the TP-Link TL-POE160S and is the answer not in the manual?

TP-Link TL-POE160S Specifications

General

Cabling technology	10/100/1000
Networking standards	IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u
Cable types supported	Cat3, Cat4, Cat5, Cat5e
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Power over Ethernet (PoE)	Yes
Certification	FCC, CE, RoHS
Product color	Black
LED indicators	Power
Maximum operating distance	100 m
RJ-45 input ports	1
Ethernet LAN (RJ-45) ports	2
Output power	30 W
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power over Ethernet (PoE) voltage	- V
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85044095
Number of products included	1 pc(s)
Package type	Box
Package depth	230 mm
Package width	170 mm
Package height	80 mm
Package weight	460 g