67
Choose the menu VLAN→802.1Q VLAN→VLAN Config to load the following page.
Figure 6-3 VLAN Table
To ensure the normal communication of the factory switch, the default VLAN of all ports is set to
VLAN1.
The following entries are displayed on this screen:
VLAN Create
VLAN ID：
Enter the VLAN ID you want to create. It ranges from 2 to 4094.
Name：
Give a name to the VLAN for identification.
VLAN Table
VLAN ID Select: Click the Select button to quick-select the corresponding VLAN
based on the VLAN ID you entered.
Select: Select the desired port for configuration.
VLAN ID: Displays the VLAN ID.
Name: Displays the name of the specific VLAN.
Untagged Ports: Show the untagged ports of the specific VLAN.
Tagged Ports: Show the tagged ports of the specific VLAN.
Operation: You can delete the specific VLAN when you click the word
"Delete".
VLAN Membership
VLAN ID: Displays the VLAN ID you choose.
To Next Page
Loading...
