TL-WDN3200 N600 Wireless Dual Band USB Adapter
8
7. After all the steps above, you will see the screen below. Click Finish to complete the setup.
Figure 2-7
8. After installation, the utility configuration page will automatically pop up as shown in the
following figure and the icon
will appear on your desktop. To connect to a network,
please refer to Chapter 3
Connect to a Wireless Network.
Figure 2-8
)Note:
If you have only installed the driver, the above configuration page will not pop up. You need to
use the Windows built-in wireless utility to connect to and manage your network.
To Next Page
Loading...
