TP-Link TL-WPA1000 User Manual

Ethernet Cable
Extender
Adapter
TL-PA7017
Powerline
1
* European version is used for demonstration in this guide.
Plug the adapter into a power outlet
and connect it to the router’s LAN
port via an Ethernet cable.
2
Tip:
Want to unify or personalize your network? See the back
page for instructions.
Plug the extender into a power outlet on the same service panel.
Wait until the extender’s Powerline LED turns on.
Note: If the LED is o, please refer to FAQ > Q2.
3
Connect your devices to the internet using the default SSID (network
name) and password on the label at the top of the extender.
Attention
2. Plug powerline devices into wall outlets instead of power strips.
Note: Using power strip will aect network performance or even cause connection drops.
1. Use the product only in the upright direction.
Wall Outlet Power Strip
Quick Installation Guide
Plug and Play
Router
WAN LAN
* Images may dier from actual products.
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Wireless Password:XXXXXXXX
On
SSID:TP-LINK_XXXX
SSID:TP-LINK_XXXX_5G
Wireless Password:XXXXXXXX

TP-Link TL-WPA1000 Specifications

General

Type	Powerline Adapter
Range	Up to 300 meters
Security	128-bit AES encryption
Modulation Technology	OFDM
Frequency Band	2.4GHz
Wireless Speed	300Mbps
Weight	0.3 lbs
Standards and Protocols	IEEE 802.11b/g/n, HomePlug AV
Data Rate	Up to 1000Mbps
Interface	Ethernet
Button	Pair
LED Indicator	Power, Ethernet, Powerline
Operating Modes	Powerline Adapter, Wireless Access Point

Summary

Plug and Play Setup

Connect Adapter to Router

Connect the adapter to a power outlet and the router's LAN port via an Ethernet cable.

Connect Extender to Power

Plug the extender into a power outlet and wait for the Powerline LED to turn on.

Access Internet with Extender

Connect devices using the default SSID and password found on the extender's label.

Important Usage Precautions

Use the product upright and plug directly into wall outlets, avoiding power strips.

Unify Wi-Fi Networks

Method ONE: Via Wi-Fi Button

Copy Wi-Fi settings from router to extender using the WPS button for unified network.

Method TWO: Via EasyMesh

Enable EasyMesh on extender to automatically join network and copy wireless settings.

Powerline Network Setup

Secure Network Pairing

Pair the powerline adapter and extender by pressing their respective Pair buttons.

Add More Extenders

Sync Wi-Fi settings to additional extenders by pairing them with the existing network.

Device Indicators and Management

LEDs and Buttons Explained

Understand the status of LEDs and the functions of buttons for device operation.

Personalize Network Settings

Manage network via tpPLC App, tpPLC Utility, or Web Interface for customization.

EasyMesh Compatibility

Learn about EasyMesh for creating seamless, whole-home Wi-Fi coverage.

Troubleshooting and Safety

Frequently Asked Questions

Find answers to common questions regarding setup, connection, and troubleshooting issues.

Safety and Compliance

Follow safety guidelines for water, fire, humidity, disassembly, and power outlet usage.