TL-WDN3200 N600 Wireless Dual Band USB Adapter
16
Figure 3-14
2. Open your router’s Web-based Utility and click WPS link on the left of the main menu. Then
click “Add device” and the following figure will appear. Enter the PIN value of the adapter in
the empty field beside PIN and then click Connect.
Figure 3-15
3. When Connect successfully appears on the screen, the WPS configuration is complete.
Or you can view the adapter’s utility page to see whether the connection has been
successful as shown in Figure 3-16.
Figure 3-16
To Next Page
Loading...
