900 Wireless Dual Band USB Adapter User Guide
4
Chapter 2 Installation
Please install the adapter into your computer before installing the driver and utility software from
the Resource CD.
2.1 Hardware Installation
There are two methods:
Method One:
Plug the adapter into an available USB interface on your computer directly.
Method Two:
Connect the adapter and your computer with the provided USB cable.
When the Found New Hardware wizard appears, click Cancel.
)Note:
When the hardware has been successfully installed on your computer, you may be prompted
'Found New Hardware Wizard' (as shown in Figure 2-1 and Figure 2-2); please click Cancel,
and then follow the Sof
tware Installation steps to install driver and utility for your adapter.
To Next Page
Loading...
