TL-WN321G 54M Wireless USB Adapter User Guide
- 28 -
Step 5. Right-click “My Computer” and select Management. In the prompt page, click Device
Manager, then right-click “TL-WN321G Wireless Lite-N USB Adapter “and select
Properties. Then set the value of “PSP Xlink Mode” as Enable following the red marked
instruction in the figure.
Figure 5-2
Step 6. Click Start > Control Panel > Network.
Figure 5-3
Step 7. Right-click Wireless Network Connection icon , and select Properties. In the
following prompt page, highlight Internet Protocol(TCP/IP) and click Properties
To Next Page
Loading...
