TL-WR340G/TL-WR340GD 54Mbps Wireless Router User Guide
14
Figure 3-5 Quick Setup
3. Click Next, and then Choose WAN Connection Type page will appear, shown in Figure 3-6.
Figure 3-6 WAN Connection Type
The Router supports three popular ways PPPoE, Dynamic IP and Static IP to connect to the
Internet.
4. Select your connection type.
1) If the connection type detected is PPPoE, the next screen will appear as shown in Figure
3-7.
Figure 3-7 Quick Setup - PPPoE
¾ User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case sensitive. If you have difficulty with this process, please contact
your ISP.
2) If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-9. Then you can go on with the wireless configuration.
3) If the connection type detected is Static IP, the next screen will appear as shown in
To Next Page
Loading...
