TL-WR720N 150Mbps Wireless N Router
¾ If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-9.
¾ If the connection type detected is Static IP, the next screen will appear as shown in
Figure 3-8.
Figure 3-8 Quick Setup - Static IP
¾ IP Address - This is the WAN IP address seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
¾ Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
¾ Default Gateway - Enter the gateway IP address into the box if required.
¾ Primary DNS - Enter the DNS Server IP address into the box if required.
¾ Secondary DNS - If your ISP provides another DNS server, enter it into this field.
5. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-9.
-12-
To Next Page
