2
English
1. Power off your modem.
2. Connect the WAN port on your router to the modem’s LAN port with an
Ethernet cable.
3. Connect your computer to one of the LAN ports labeled 1~4 on the router
with an Ethernet cable.
4. Power on the modem and wait for one minute.
5. Plug the provided Power Adapter into the POWER jack on the back of the
router and the other end to a standard electrical wall socket. Press the
ON/OFF button to power on the router.
1. Insert the TP-LINK Resource CD into the CD-ROM drive.
1
Hardware Connection
Please confirm that the WIFI switch is ON so that client devices
can connect to the router wirelessly.
2
Configuration for Windows with Setup Wizard
Note
If you are using a MAC/Linux or a Windows computer without a
CD drive to run the mini CD, please refer to Appendix 1 fo
configuration.
Note
To Next Page
Loading...
