EasyManuals Logo

TP-Link TL-WR940N Quick Installation Guide

TP-Link TL-WR940N
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick
Installation Guide
Wired
Connect wirelessly by using
the default network name
(SSID) and password
printed on the product label
at the bottom of the router.
Open a web browser on the computer and configure the router according to the following main clues.
Enter http://tplinkwifi.net in the address bar. Type in admin for both the user name and password
and click Login.
Note: If the login window does not appear, please refer to FAQ->Q1.
Click Finish to complete the setup.
Click Next to continue the Quick Setup.
450Mbps Wireless N Router
TL-WR940N / TL-WR941ND
2. Configure the Router
Power off the modem,
and remove the backup
battery if any.
Connect the modem to the Internet
port on your router using an Ethernet
cable.
Power on the modem,
wait for 2 minutes and
then power on the router.
Check the following LEDs to
ensure the hardware connection
is correct.
21 3 4
Power Off
Power On
Ethernet cable
Power On
Enjoy!
Now your wired and
wireless devices can
connect to the Internet !
Back
Finish
Congratulations!
Quick Setup-Finish
Exit
Next
To continue, please click the Next button.
To exit, please click the Exit button.
Quick Setup
a
b
ec
http://tplinkwifi.net
Or
1. Connect the Hardware
INTERNET
Wireless
Verify or change the wireless network settings, and click Next.
d
Wireless Network Name:
Wireless Password:
TP-LINK_XXXX
XXXXXXXX
Quick Setup- Wireless
Back
Next
Wireless Security:
Note: You may customize your wireless network name and password.
If you do so, please note down the new ones.
Note: If your Internet comes via an Ethernet cable from the wall instead of any DSL/Cable/Satellite modems, please connect the Ethernet cable directly to the router’s WAN port.
INTERNET INTERNET
7106506029 REV5.0.2
1
2
Connect your computer to the router (Wired or Wireless).
admin
admin
Copyright © 2014 TP-LINK Technologies Co., Ltd. All rights reserved.
Login
Auto-Detect
Dynamic IP (Most Common Cases)
Static IP
PPPoE/Russian PPPoE
L2TP/Russian L2TP
PPTP/Russian PPTP
Back
Next
Quick Setup-WAN Connection Type
Select your WAN Connection Type, or click Auto-Detect
if you are unsure what your connection type is. Click Next
and follow the instructions to continue.
Power
On
Wireless
On
Internet
On
Modem
Typical Connection
INTERNET
Wireless N Router

Other manuals for TP-Link TL-WR940N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-WR940N and is the answer not in the manual?

TP-Link TL-WR940N Specifications

General IconGeneral
Colorblack
Wi-Fi Mesh Systemno
Frequency Bandother
Ethernet Standard10/100
Ethernet Switchyes
Wireless Standardn
Antennas3
Parental Controlyes
Firewallnat
Data Encryptionyes
Encryption Typewpa, wpa2, wpa-psk, wpa2-psk
Security Features64/128/152-bit wep, wpa, wpa2, wpa-psk, wpa2-psk
Portsrj-45
LAN Ports4
WAN Ports1
Built In Modemno
Smart Applicationstrue, tether
Weight and Dimensions IconWeight and Dimensions
Height1.1 inches
Width7.9 inches
Net Weight0.02 pounds

Related product manuals