TP-Link TL-WR940N - Installation Manual

1
Note
Please use onl
y
wired network connections to configure the Route
r
.
Turn off all of your network devices, including your computer, Modem and the
Router.
Connect your computer to the
Port labeled 1~4 on the Route
r
with an Ethernet cable.
Plug the provided Powe
r
A
dapter into the Power jack on
the back of the Router and the
other end to a standard
electrical wall socket.
Connect the WAN port on your
Router to the Modem’s LAN
port with an Ethernet cable.