TP-Link UB500 - English

01
English
1 Connect to a Computer
a. Disable all existing Bluetooth devices (both
built-in and third party) from the Device
Manager on Windows.
b. Insert the adapter into a USB port on your
computer directly.
2 Install Bluetooth Driver
a. Download the latest driver at
https://www.tp-link.com/download-center.
Tip:
For Windows 10/8.1 system, the driver installation will
automatically start when connected to the internet. If
not, please download the driver manually.
b. Extract the downloaded le and run the
setup.exe to start driver installation.
c. Follow the instructions to complete
installation.
d. Once the process is nished, restart your
computer.
Notes:
• TP-Link Bluetooth 5.0 USB Adapter will be listed in the
Device Manager when the driver is installed correctly.
• If the driver installation fails, disable the antivirus
software and rewall, then try again.
• In Windows 7, if a Windows Security message pops
up, refer to https://www.tp-link.com/faq-2760.html.