TP-Link UE200 - Using the Adapter; Appendix; LED Indicators; Troubleshooting Guide

Using the Adapter
Plug the adapter into the USB port. The automatic driver installation will
be completed within seconds, and then you can enjoy the Internet.
*
Appendix
For more information, visit our website: www.tp-link.com
Troubleshooting
Q: What to do if I cannot connect to the Internet?
A1. Make sure the network adapter is connected properly and the LED is on.
A2. Download and install the compatible driver for your operating system from our
ocial website at www.tp-link.com.
A3. Contact our Technical Support if the problem still exists.
IndicationStatus
Flashing
On The adapter is connected to the USB port and wired network.
O The adapter is not connected.
The adapter is transferring data.
LED
* For Windows, you may be prompted to install a driver, please click to install. For
Windows 7, if prompted “The program might not have installed correctly” after
driver installation, please click Cancel.
* For Mac OS X (10.10 and older),
if the adapter cannot be identied after you restart the
Mac, please
unplug the adapter and replug it. It is recommended to download and
install the latest driver to ensure the adapter can be permanently identied.
* For Mac OS 10.11, download and install the driver from our ocial website at
www.tp-link.com.
wired network
RJ45 Port
USB 2.0
USB Port
computer