TP 233 Series - Safety; Signal Words

SAFETY
READ AND FOLLOW THE INSTRUCTIONS
IN THIS MANUAL AND ESPECIALLY IN THE
SAFETY SECTION. FAILURE TO DO SO
CAN RESULT IN SERIOUS INJURY OR
DEATH.
TAKE NOTE! THIS SAFETY ALERT
SYMBOL FOUND THROUGHOUT THIS
MANUAL IS USED TO CALL YOUR
ATTENTION TO INSTRUCTIONS
INVOLVING YOUR PERSONAL SAFETY
AND THE SAFETY OF OTHERS.
THIS SYMBOL MEANS
ATTENTION!
BECOME ALERT!
YOUR SAFTEY IS INVOLVED
SIGNAL WORDS:
The signal words DANGER, WARNING and CAUTION are used with the
safety messages in this manual and with each safety signs. They are
defined as follows:
DANGER: Indicates an immediate hazardous situation that, if not avoided,
could result in serious injury or death. This signal word is to be limited to
the most extreme situations typically for machine components that, for
functional purposes, cannot be guarded.
WARNING: Indicates a potentially hazardous situation that, if not avoided,
could result in serious injury or death, and includes hazards that are
exposed when guards are removed. It may also be used to alert against
unsafe practices.
CAUTION: Indicates a potentially hazardous situation that, if not avoided,
may result in minor or moderate injury. It may also be used to alert against
unsafe practice.
If you have any questions not answered in this manual or require additional
copies or the manual is damaged, please contact your dealer or Taylor
Pittsburgh Mfg., Inc. P.O. Box 1200 Winfield, AL 35594 (205) 487-3202 or
www.taylorpittsburgh.com
6