11
Loudness
off / on The amplifier features a volume-dependent tone
control (LOUDNESS) which compen-sates for
the frequency-dependent sensitivity of the
human ear, and therefore of human hearing, at
very low volume levels.
This set-up option is used to switch loudness on
or off.
Tone (sound fields)
The following set-up options are available if the internal loudspeakers of the
are used for playback.
(See the ‘System Configuration menu / Loudspeaker menu’ for the method of
switching to the internal loudspeakers)
Normal Linear tone control, without equalisation,
suitable for using the system on sideboards
and similar locations.
Smooth If you prefer a relaxed sound image with slight
de-emphasis on the treble, select the Soft
sound field option.
Near If the listening distance to the
is very
small (<1.5 m), we recommend the Close
setting (close-range equalisation)
Speech This option improves the comprehensibility of
speech in spoken word programs, reportage
and sports transmissions.
Shelf If the
is set up in a confined position
close to shelf walls, the result may be
excessive emphasis on low frequencies; this
can be cor-rected by selecting the SHELF set-
up option.
Table Setting up the system on a table with a large
top can cause particular frequency ranges to
be amplified. This problem can be corrected
by selecting the Table set-up option.
The following set-up options are available if the
is operated in
conjunction with external loudspeakers.
(See the ‘System Configuration menu / Loudspeaker menu’ for the method of
switching to external loudspeakers.)
Normal
Wall
Corner
Positioning loudspeakers close to a wall or
corner has the effect of emphasising the low
frequencies, which can result in an unnatural,
bass-heavy sound image. Excessive bass
emphasis caused by speaker positioning can
be corrected in this menu point by selecting
one of the set-up options Wall or Corner.
To Next Page
Loading...