Need help?Do you have a question about the T+A MP 200 and is the answer not in the manual?
General| Manufacturer | T+A |
|---|---|
| Model | MP 200 |
| Signal-to-Noise Ratio | > 110 dB |
| Total Harmonic Distortion | < 0.001% |
| Power Supply | 100-240 V, 50-60 Hz |
| Audio Formats Supported | MP3, WMA, AAC, FLAC, WAV, ALAC |
| Streaming Services | Tidal, Qobuz, Deezer, Spotify Connect |
| Inputs | Ethernet, USB, Wi-Fi |
| Outputs | Digital Coaxial, Digital Optical, Analog RCA |
| Frequency Response | 2 Hz - 50 kHz |
| Type | Multi Source Player |
Instructions for physically placing and setting up the device.
Guidance on making the necessary physical connections to the device.
How to turn the device on and off.
Instructions for establishing a network connection.
How to select different audio sources on the device.
Navigating and using the device's system and source-specific menus.
Operating menus and controlling playback using the SELECT/OK knob.
Selecting audio sources using the remote control buttons.
Controlling playback and navigating menus with the remote.
Configuring sources, display brightness, and display mode.
Adjusting screen brightness and display behavior.
Setting language, device name, energy saving, and network preferences.
Steps for connecting the device to a wired network via LAN.
Configuring network parameters and DHCP settings.
Establishing a wireless network connection via WLAN.
Using the WPS function to connect to a WLAN.
Manual steps for connecting to a WLAN network.
Using the T+A Music Navigator app for WLAN configuration.
How to choose and switch between different audio sources.
Methods for manually and automatically searching for FM stations.
Pairing Bluetooth devices for audio playback.
Step-by-step guide to updating the device's firmware.
To Next Page
