CD player operation
Source selection
Press the DISC button on the front panel of the MP 200 or the button on the FM 200
remote control repeatedly if necessary until the source DISC is shown in the display.
Insert and eject a disc
• Select Disc as source.
• Insert the disc into the drive with the label
side facing up until the disc is automatically
pulled in (see illustration).
• Briey press the
button to eject the CD.
• As soon as the disc has been ejected, it can
be removed.
j
The disc mechanism is designed to play round 12 cm standard discs only. Do not insert 8 cm discs or discs
with unusual shapes. These may damage the drive.
Playback mode
The CD player in the MP 200 features various playback modes. During playback the current playback mode
is shown on the screen.
Big display view
Detailed display view
The playback mode can be set with the remote control only. Long presses on the button on the FM 200
select the playback mode. Press repeatedly if neccessary.
The following modes are available:
No indicator Normal playback of the whole disc, or normal program playback.
The tracks of the CD or a playback program are continuously repeated
The track of the CD or a playback program which has just been played is continuously
repeated.
45
To Next Page
Loading...
Need help?
General
