T+A MP 200 - Device Settings Configuration; Menu Operation on Device; Menu Operation via Remote

Settings
Menu operation
Operation on the device
• To call up the system settings menu, press
the SYS button 1 on the front of the MP 200.
• Select an item in the menu with the SELECT
knob 2.
• To change a selected menu item, conrm by
pressing the SELECT knob and then change it by
turning the knob.
• To conrm the setting, press the knob again after
the change.
• To cancel a change, you can always press the
SELECT button for a long time or briey press the
SYS button.
• By pressing the SELECT knob for a long time, you
can return to the previous menu level.
• To exit the menu, press the SYS button.
Operation by remote control
• To open the system settings menu, press the
button on the remote control.
• Use the buttons to select an item in the
menu.
• To change a selected menu item, rst press
the button and then use the buttons
to alter the setting.
• To conrm the setting, press the button again
after changing it.
• To cancel a change, you can always abort by a
long button press on or by a brief press on the
button.
• Press and hold the button to return to the
previous menu level.
To exit the menu, press the button..
27