EasyManua.ls Logo

TQ-Systems HPR50 - Page 4

Default Icon
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN – 4
The Drive Unit can heat up during operation depending on
the load and other factors, so that the surface of the Drive
Unit and nearby components (Drive Unit cover) become hot.
Do not touch the Drive Unit with your hands or legs during or
after a ride. Otherwise there is a risk of burns.
NOTE
The housing of the Drive Unit must not be opened.
The warranty expires automatically when the housing of the Drive Unit is
opened.
The Drive Unit may only be removed and installed by an authorized
workshop.
1.5 Riding safety instructions
Observe the following points to avoid injuries due to a fall when starting with
high torque:
We recommend that you wear a suitable helmet and protective clothing
every time you ride. Please observe the regulations of your country.
Consider the potentially high torque of the drive when starting up.
Select a suitable gear ratio or pedal assistance for starting off to avoid the
risk of a wheelie (front wheel lifts off) or rollover.
CAUTION
Risk of injury
Practice the handling of the e-bike and its functions without assistance from
the Drive Unit at first. Then gradually increase the assistance mode.

Related product manuals