What to do if TQ-Systems TQ-HPR50 show ERR 403 DRV COMM?
If your TQ-Systems Bicycle Accessories display the error code ERR 403 DRV COMM, which indicates a Peripheral Communication Error, follow these steps: 1. Restart the system. 2. Update the software, if the installed firmware is outdated. 3. Inspect the peripheral components for any broken wires, and check all cable and plug connections. 4. Remove any third-party components.
Why does my TQ-Systems TQ-HPR50 Bicycle Accessories display ERR 408 DRV HW?
The ERR 408 DRV HW error on your TQ-Systems Bicycle Accessories indicates a drive unit overcurrent fault, often due to unintended use. To resolve this: * Avoid extraordinary cycling situations as much as possible. * Update the software, if the installed firmware is outdated. Additionally: 1. Restart the system. 2. If the error persists during startup, consider replacing the motor.
How to fix ERR 401 DRV SW on TQ-Systems TQ-HPR50 Bicycle Accessories?
The ERR 401 DRV SW error on your TQ-Systems Bicycle Accessories indicates a general software error. To resolve this: 1. Restart the system. 2. Update the software, if the installed firmware is outdated.
General| Brand | TQ-Systems |
|---|---|
| Model | TQ-HPR50 |
| Category | Bicycle Accessories |
| Language | English |
To Next Page