Tracer eXplore SJ 4060 - WiFi Connection

22
User’s manual
EN
Tracer eXplore
SJ 4060 + WiFi
7. WiFi connection
This product can connect via WiFi to any tablet or smartphone using
iOS or Android system. To make the connection, follow the following
sequence:
• Install the Ez iCam app on your smartphone or tablet. You can nd it in
the Google Play Store (for Android devices), or the App Store (for iOS).
• When you turn on the camera, press the "Down" button (WiFi).
Information about the attempt to establish a WiFi connection will be
displayed.
• Turn on WiFi on your smartphone or tablet. Search for the network
generated by the camera and connect to the network with the name
displayed by the camera. Enter password (default: 1234567890).
• After the connection is initiated, information will appear on the screen.
It is not possible to preview the recordings and frames on the camera
screen during a WiFi connection.
• After establishing a WiFi connection between the camera and a smart-
phone/tablet via Ez iCam app, you can change the camera settings to
a live preview of recorded images.