FEATURES
INTRODUCTION
INSTRUCTION MANUAL
Thank you for purchasing TRACKSTAR 1/5 Brushless Sensorless Car ESC. Please read the
Instruction Manual thoroughly before you use the product. These operating instructions are
designed to ensure that you can quickly reference its features and functions and make fully use
of this product.
1
1/5 Brushless Sensorless Car ESC
Built-in powerful BEC. Output voltage is adjustable 6.0V or 7.4V.
Maximum output current up to 15A.
LiPo battery support up to 8 cells.
Data Logging : The controller’s parameters can be record such as your battery volts/amps
draw, motor rpm, and controller temperature. This is a good way to make sure that the rest of
your setup is performing well within its limits.
Red copper connectors are used to decrease the internal resistance in high current situations.
Heat transfer : Internal resistance is reduced by laminated copper stack control technology so
dynamic thermal equilibrium is achieved.
Safety features : low voltage protection, motor and ESC overheat protection and signal lost
protection.
The ESC can be programmed by TrackStar Multi-Function Smart Program Box
(SKU# 9052000048) The ESC firmware can be updated by connecting the ESC to computer
via smart program box.
To Next Page
Need help?
General