to ash, the device begins to search its position and logs into Tracker
Live service. As soon as the device is ready to use, the LED-light
ashes green in 1 second interval. It starts automatically to send
positions in 1-minute interval continuously.
Turning o
In order to switch the device o, turn calmly the power switch
counter-clockwise 1–1/2 turns not shorter than 5 seconds, but not
longer than 30 seconds. This is a safety feature that is intended to
prevent the unauthorized person from shutting down the collar. The
device can be turned o even if it is in real time tracking. The indicator
lights may ash even after turning o for 5-15 seconds.
Before unleashing the dog
• Make sure the program shows the latest position correctly
• Place the collar on dog’s neck so that the switch shows on the dog
toward dog’s chest.
• Do not unleash the dog, until you are sure that the device sends its
positions.
TIP: Start the device already at home or on the way to the hunting area.
This way, the device can safely nd satellites and make other
necessary processes. The power consumption of the device with basic
settings is negligible, even if it starts 15-30 minutes before actual use.
To Next Page
Loading...
