the device outside or to a place with a clear sky view.
1. Turn the device on, leave the device outside until only the green light
starts to blink, then wait about 5 minutes
2. In order to add a device into your phone:
ANDROID: select
> > Add a new GPS locator > Search by serial
number
iPHONE & iPAD: select
> Targets > > Search by serial number
3. Fill in the information requested
At the end of the registration, please remember to save the share
name, phone number, and passwords of your device for future use.
You can also access your user ID in Tracker App > Map view > click on 3
points on the right side of your screen)> [About]
For your GPS locator ID: Dog Menu (Click Dog’s Name)> Live and
screen Settings
Basic operation during hunting
Switching on
Turn the power switch into the position ON. Indicator LED-lights begin
To Next Page
Loading...
