Installing your own SIM card to the device
In case of Tracker EASY or reseller pre-installed the
SIM card, you can skip this phase.
Before installing the SIM card into the device, please
remove the PIN code. Insert the card into a mobile
phone, and in security / security menu request to
remove the PIN code. We advise you also to verify that
the sim card is working properly by making a test call
and checking the internet connection by opening an Internet browser.
In STANDARD FORMAT, insert the SIM card into the device as shown
below. To help the SIM card slide smoothly in, press the SIM card a bit
up when inserting it into the device. Check the protective sim door and
clean the sealing surfaces. Press the sim door with your ngers rmly
around the whole place. Tighten the screws to the sim door. Do not use
force or try to overtighten the screws to the bottom of the protective
cover.
Adding new device to Tracker Live Service
In case of Tracker EASY or reseller already did this phase, you can skip
this phase and follow the instructions in package or in delivery docu-
ments.
The device needs a valid SIM card properly installed and must be swit-
ched on. For faster GPS and Glonass satellites receptions, please, take
To Next Page
Loading...