To Next PageTo Next Page
Need help?Do you have a question about the Traditional Tool Repair Inc. P321 and is the answer not in the manual?
General| Brand | Traditional Tool Repair Inc. |
|---|---|
| Model | P321 |
| Category | Power Tool |
| Language | English |
Machine P321 conformity declaration with relevant standards.
Guidelines for safe battery use, storage, and disposal.
Mandatory use of safety glasses to prevent eye injuries.
Warnings on strap tensioning, breakage, and improper use.
Instructions for safely cutting tensioned straps.
Maintaining tidy workspace and proper balance to avoid falls.
Awareness of tool maintenance, modification risks, and potential injuries.
Overview of P321 function, dimensions, and weight.
Measured sound and vibration emissions from the tool.
Details on suitable strap materials and dimensions.
Specifications for strap tensioning force, speed, and joint strength.
Battery voltage/capacity and optimal working temperature range.
Information on included battery and available chargers.
Details on wearing plates, suspension, and adjustment kits.
Explains LEDs, switch, lever, and buttons for operation.
Instructions for inserting and charging the battery.
Procedure for safely removing an empty battery from the tool.
How to set the force and speed for strap tensioning.
Procedure for adjusting the duration of the welding cycle.
Method for setting welding pressure based on strap thickness.
Instructions for feeding the strapping around the package.
Steps for correctly inserting the straps into the tool.
Procedure for tensioning the strap using the tool's function.
Process for welding and sealing the straps.
Steps for safely removing the tool after sealing.
How to visually inspect and evaluate the quality of the seal.
Steps for taking apart the tensioning wheel and grippers.
Reassembly instructions for tensioning wheel and grippers.
Steps for removing cutter, welding stop gripper, and welding gripper.
Reassembly instructions for cutter, welding stop gripper, and welding gripper.
Procedure for readjusting the coupler after replacement.
