OIL SEALS
Each hub has a rear (inner) seal which keeps oil from leaking out of the back
of the hub. The spring-loaded seals used on your axle are the best available
for the application. The axle spindles are equipped with permanent,
polished stainless steel seal surfaces for the seals to rotate on. This system
should provide many years of use before seals need to be replaced.
REPLACEMENT PARTS
Please contact UFP for certified replacement parts. Although some parts look
identical or have the same description, they may not have the quality or
dimensional tolerances needed to assure trouble free operation and optimum
performance.
To Next Page
Loading...