Need help?Do you have a question about the Tramigo T22 and is the answer not in the manual?
Lists various practical applications and use cases for the Tramigo T22 device.
Details the components and accessories included with the Tramigo T22 unit.
Explains the function of the LED indicators and control buttons on the T22 unit.
Guides the user through the initial setup and configuration of the Tramigo T22 device.
Explains how to add and manage user access levels for the Tramigo T22.
Describes the internal directory for storing and referencing place names.
Details the various tracking capabilities and automatic reporting features of the T22.
Covers the voice call functionalities and requirements of the T22.
Explains features like unit naming, status checks, settings, power, and language options.
Details how the T22 manages incoming and outgoing SMS messages.
Explains the sleep modes and power saving features of the T22 unit.
Provides a quick reference table for all available T22 commands, their parameters, and usage.
Provides in-depth explanations for each individual Tramigo T22 command.
Details the ADDPLACE command for adding locations to the T22's directory.
Explains the ADDUSER command to grant access to other users.
Describes the ALARM command for setting up motion and security alerts.
Explains the BOOT command to restart the Tramigo T22 application.
Details the COORD command for controlling coordinate display formats.
Explains the DEBUG command for enabling/disabling output to the USB port.
Describes the DELPLACE command for removing locations from the directory.
Explains the DELUSER command to remove users from the system.
Details the DISABLE command for vehicle immobilization.
Explains the FIND command to get the vehicle's current position and status.
Describes the GET command to retrieve parameter settings.
Explains the HELP command for getting information on other commands.
Details the IGNITION command for reporting ignition status.
Explains the LANGUAGE command to set the unit's language.
Details the LISTEN command for remote cabin monitoring.
Explains the LISTUSER command to display registered users.
Details the LOWBALANCE command for setting low balance notifications.
Explains the METRIC command to select units of measurement.
Details the NAME command to change the unit's name.
Explains the OWNER command to register the unit's owner.
Details the PASSWORD command to change the system password.
Explains the Personal Assistance button functionality for panic reports.
Details the POWER command for battery level reporting.
Explains the REPORT command to control user reporting settings.
Details the SENSOR command for external sensor reporting.
Explains the SET command for configuring unit parameters.
Describes the SETTINGS command to display unit configuration.
Details the SMS command for sending text messages.
Explains the SPEED command for controlling speed reporting.
Details the SpeedDial command for configuring quick dial numbers.
Explains the STATUS command to display unit and user settings.
Details the TIME command for adjusting message timestamps.
Explains the TRIP command for controlling trip start and end reporting.
Details the VERSION command to display software and hardware versions.
Explains the WHEREIS command to display location relative to a place.
Details the ZONE command for setting up area-based alerts.
Details the procedure for returning goods for repair or replacement.
To Next Page
General