Why is the control panel of my Tramontina 80901/106 Ice Maker not working?
If your Tramontina Ice Maker's control panel isn't working, make sure it's properly connected to a wall outlet and not a GFCI outlet, as this type of outlet may not provide adequate power.
Why is my Tramontina 80901/106 not producing ice even though the cycle seems normal?
If your Tramontina Ice Maker is making ice, but no ice is being produced, it could be due to the ambient temperature or the water temperature in the reservoir being too warm. Try moving the ice maker to a cooler area and replacing the water with cooler water.
What to do if the 'ADD WATER' and 'ICE BIN FULL' lights are both on in my Tramontina 80901/106 Ice Maker?
If the 'ADD WATER' and 'ICE BIN FULL' indicator lights are on at the same time on your Tramontina Ice Maker, it could be due to a few reasons. First, an electrical power surge might be the cause; in this case, turn off the ice maker, unplug it, and then reconnect and restart it. Another possibility is air in the lines or blocked lines; try removing the water drain plug to drain a little water, replace the cap, add water if needed, and restart the ice maker. Finally, the water reservoir might not be detecting the water level because ice is blocking the ice shovel; turn off the ice maker, remove the ice, and restart it.
Why does my Tramontina 80901/106 Ice Maker keep making ice when the ice bin is full?
If the ice bin in your Tramontina Ice Maker is full but it keeps making ice, it might be because direct sunlight or sunlight reflection is affecting the ice bin capacity sensors. Try moving the appliance to a location away from direct sunlight.
What to do if the 'ICE BIN FULL' light is on in my Tramontina 80901/106?
If the 'ICE BIN FULL' light is on for your Tramontina Ice Maker, it means the ice bin is full. You should remove any ice cubes blocking the ice capacity sensors and then empty the ice bin.
How to stop ice cubes from sticking together in my Tramontina 80901/106?
If the ice cubes from your Tramontina Ice Maker are sticking together, it could be that the ice-making cycle is too long, or the water in the reservoir is too cool. First, remove the ice cubes. Then restart the ice maker and select the SMALL ice cube size. If that doesn't work, try replacing the water in the reservoir with warmer water.
What to do if the 'ADD WATER' light is on in my Tramontina 80901/106?
If the 'ADD WATER' light is illuminated on your Tramontina Ice Maker, it indicates that there isn't enough water in the water reservoir. Turn off the ice maker, add water up to the maximum water line, and then press the ON/OFF button to restart it.
Key safety measures including protection against shock, proper use, and child safety.
Ensures proper grounding and safe use of electrical outlets and extension cords.
Specifies the type of water to use and warns against flammable fluids.
Details the function of buttons and indicator lights on the control panel.
Provides key specifications such as power, refrigerant, dimensions, and weight.
Steps for preparing the ice maker before initial operation, including unpacking and cleaning.
Guidance on connecting the appliance to power and starting the ice making process.
Explanation of indicator lights for ice bin status and water level.
Instructions for cleaning the ice maker components and exterior surfaces.
Guidelines for drying the interior and preparing the appliance for storage.
Troubleshooting guide for common problems like indicator lights, non-operation, and ice issues.
Details on how to contact customer service for product issues or assistance.
Information on the one-year limited warranty, including coverage and exclusions.
Instructions and form for product registration to receive support.
General| Model Number | 80901/106 |
|---|---|
| Brand | Tramontina |
| Material | Stainless Steel |
| Ice Production Capacity | 12 kg per day |
| Ice Storage Capacity | 1.2 kg |
| Ice Cube Size | Small |
| Weight | 5.5 kg |
| Color | Stainless Steel |
| Capacity | 1.2 kg |
To Next Page