9. Moving parts. When the generator set is in operation, the cooling fan is rotating. Do not open the
maintenance cover and make adjustment while generator is running. You must shut down the engine and
turn electrical breaker to the off position before maintenance or operation. Before restarting, close all
service panels.
10. CAUTION. FOR STANDBY ELECTRICAL OUTPUT, CONNECT GENERATOR TO SUITABLY RATED TRANSFER
SWITCH IN ACCORDANCE WITH THE CANADIAN ELECTRICAL CODE, PART I. THIS UNIT REQUIRES A
200amp TRANSFER SWITCH
11. THERE IS A PERMANENT CONDUCTOR BETWEEN THE GENERATOR (STATOR
WINDING) AND THE FRAME.
12. Keep top cover locked at all times with provided key. Keep key stored in a safe place
out of the reach of children. If key is lost please call 844-367-5660.
Operating System Functions and Denitions
Alarm
Data Check Up
Gens Normal
Indicator Data Check Down
Stop Indicator Close Gens
Stop
Manual Manual Auto Auto Start Set
Indicator Indicator
Power Switch Fuel Switch
13
032-5095-1A-EN
To Next Page
Loading...
