Tranquil Ease HC-2H User Manual

3 | P a g e
4.
All wires from the heat pad and motors should be zip-tied together in the back frame,
making sure wires are not crimped. The adaptor connection (shown with the red arrow
above) should be attached to the bottom rear back frame with a clip. The Power
Source/Transformer is plugged into the connection and then into the wall outlet.
01/21/2013 (fjh)

Tranquil Ease HC-2H Specifications

General

Brand	Tranquil Ease
Model	HC-2H
Category	Control Unit
Language	English