Transcend DrivePro 620 - 6-2 Connecting to the DrivePro

Option 2: Select the WiFi signal.
Tap Settings > WiFi from your mobile device.
Select the WiFi network with DP250 in the SSID. (The default password is 12345678.)
2. Tap the DrivePro App icon on your mobile device and connect to the DrivePro 620.
3. The image below will be displayed when you are connecting to the DrivePro.
4. Visit the DrivePro FAQ for detailed operation guidance.
"Note"
This feature applies only to fi rmware version 3.2 and later of the DrivePro 250.

"Note"
Since the front and rear cameras of the DrivePro 620 sync data via WiFi, please do not change the
WiFi password on the DrivePro 620.
