Transcend DrivePro 620 - Page 7

2. To remove, push to eject the memory card out of the slot.
We recommend Transcend ’ s High Endurance microSD cards or MLC-based memory cards to
ensure the best recording performance.
High Endurance microSDHC card
High Endurance microSDXC 350V card
For more details on the approximate recording time according to card capacity, go to FAQ on our
o ffi cial website.
"WARNING"
Always format new memory cards through DrivePro before using them for the fi rst time.
Formatting will erase all data on the memory card. To format the memory card in the
front camera DP250, press the Settings button and select Format Card . For the rear
camera DP10, you can either download the DrivePro app and access Settings for operation,
or connect the power and long-press the emergency button until the red light fl ashes rapidly.
Note: After long-pressing the emergency button of the DP10, the device settings will be restored to
default.
The DrivePro 620 supports only the FAT32 fi le system and does not support exFAT or NTFS.

"WARNING"
To prevent damage to the memory card and potential data loss, please do not remove the memory
card during a shutdown.
