Accessories
Adhesive Mount
Exclusively for Transcend's DrivePro dashcams, the adhesive mount features a strong
adhesive pad, a locking T tip and a 360° swivel, allowing you to easily adjust your mount
to any desired angle.
Installation Guide
1. Clean the area of the windshield where the adhesive pad will be placed.
2. Remove the protective film and firmly press the adhesive pad onto the windshield.
3. Allow at least 24 hours for the mount to properly adhere to the surface.
4. Insert and slide the dashcam into the adhesive mount.
To Next Page
Need help?
General