Transcend TS32GDPB52A User Manual

5
Back View
3-2 Charging the DrivePro™ Body 52
Before use, please ensure that the battery is fully charged. Charge the DrivePro™ Body 52 via the
bundled 3.5mm to USB cable. A solid orange LED light is visible while charging; the orange LED light
will turn off when fully charged.
To charge the DrivePro™ Body 52, you can either:
1. Connect the bundled 3.5mm to USB cable to a wall outlet with the included adapter
2. Connect the bundled 3.5mm to USB cable to a computer
3. Connect the DrivePro™ Body 52 to Transcend’s Docking Station (Optional)
WARNING:
1. The DrivePro™ Body 52 only supports FAT32 file format.
2. Do not use the 3.5mm to USB cable on other devices.
3-3 LED Indicator Table
Recording
LED Status Definition

Flashing Memory almost full

Flashing Low battery
Connected to computer/power
LED Status

Flashing Transferring data
Solid Waiting for backup
Camera Clip Holder
Camera Velcro Holder

Transcend TS32GDPB52A Specifications

General

Brand	Transcend
Model	TS32GDPB52A
Category	Action Cameras
Language	English