Transcend USB JetFlash - System Requirements; Before Use

2
recorder;
• Power Saving Function: Auto-powers off after two minutes without use.
• LEDs indicate the usage status of JetFlash.
System Requirements
Desktop or notebook computer with USB port
One of following operating systems:
• Windows 98SE
• Windows Me
• Windows 2000
• Windows XP
• Mac OS 9.0 or later
• Linux kernel 2.4 or later
Before Use
1. Keep JetFlash away from heat, direct sunlight, and moisture. Do not bend, flex, or
drop JetFlash.
2. Make sure the HOLD switch is set to the “OFF” position.
3. Plug or unplug JetFlash by grasping the sides.
4. Never use the “Quick Format” or “Full Format” of Windows to format your
JetFlash.
5. Follow the procedures in “How to Unplug JetFlash Safely” to remove JetFlash from
the system.