EasyManuals Logo

Transfer Flow TRAX 3 User Manual

Transfer Flow TRAX 3
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Manual operation of the TRAX 3™ Liquid Crystal Display (LCD)
while driving could lead to unsafe driving conditions which can
cause an accident or a serious injury. Observing the screen
should only be done when it is safe to do so. Mounting the TRAX
3™ LCD and routing the wire harness should be done where the
driver’s view or operation of the vehicle cannot be obstructed.
Important Safety Information
Page 8
Filling Fuel Tank:
Never ll a fuel tank near a ame or ignition source which might ignite the
fuel vapors.
• Never ll the OEM or Transfer Flow auxiliary fuel tank with the engine or
ignition turned on.
Avoid breathing fuel vapors or allowing fuel to contact the skin.
Always ll fuel tanks while the vehicle is on a at level surface.
Always open the fuel cap slowly to allow any pressure to escape.
Never overll or “top-o” any fuel tank. Overlling the fuel tank may cause
damage to the emissions system, cause dangerous spills and possibly result
in a re. The Transfer Flow TRAX 3™ system may also shut down in the event
of a “top o” condition.
Never siphon fuel using the mouth, as this practice is dangerous and
potentially fatal. Use an appropriate pump.
Never allow fuel to contaminate soil or waterways. Properly contain and
dispose of spilled fuels and cleanup materials.
Other Important Safety Information:
Use only Transfer Flow replacement parts. Many parts of our fuel system
appear common, but are actually special parts which are critical for safe
operation. See Page 9 for more information.
Disconnect the battery before working on Transfer Flow fuel systems.
Never modify or over-pressurize a fuel tank.
Do not grind, torch, weld, cut, or modify a fuel tank.
Do not sleep or let pets stay in a pickup with a camper shell that contains an
in-bed fuel tank system.
Do not smoke near a fuel tank.
Never connect a TRAX 3™ system to a previously modied fuel system.
TRAX 3™ is designed to work only with Transfer Flow auxiliary fuel tanks.
Under no circumstance should TRAX 3™ be used in conjunction with a
modied fuel tank system or other aftermarket fuel tank systems.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Transfer Flow TRAX 3 and is the answer not in the manual?

Transfer Flow TRAX 3 Specifications

General IconGeneral
BrandTransfer Flow
ModelTRAX 3
CategoryControl Unit
LanguageEnglish