Transition Networks PointSystem CPSMC0100-200

To Next Page

User’s Guide

CPSMC0100-200

Single-Slot PointSystem™ Chassis

The Transition Networks CPSMC0100-

200 series single-slot PointSystem™

chassis is designed for installation of a

single, selectable Transition Networks

PointSystem™ media converter slide-

in-module.

Installation . . . . . . . . . . . . . . . . . .2

Technical Specifications . . . . . . . .4

Troubleshooting . . . . . . . . . . . . . .5

Compliance Information . . . . . . . .6

Part Number Description

CPSMC0100-200 Single-Slot PointSystem™ chassis intended for installation of

any PointSystem media converter slide-in-modules up to 6 W.

Optional Accessories (sold separately)

Part Number Description

SPS-1872-SA Optional External Power Supply; 18-72VDC Stand-Alone

Output: 12.6VDC, 1.0 A

WMBP Optional Wall Mount Bracket; 5.0 in. (127 mm)

WMBV Optional Vertical Mount Bracket; 5.0 in. (127 mm)

WMBD Optional DIN Rail Mount Bracket; 5.0 in. (127 mm)

Note: The following media converter families are not compatible with Transition

Networks CPSMC0100-200 single-slot PointSystem™ chassis: C4TEF,

CAPTF, CBFTF-120, CBFTF-140, CEMTF, CGFEG and the CMEFG.

Need help?

Do you have a question about the Transition Networks PointSystem CPSMC0100-200 and is the answer not in the manual?

Transition Networks PointSystem CPSMC0100-200 Specifications

General