Transmitter Solutions Monarch 318LIPW1K User Manual

CONTENTS
1A - General information
1B - Technical specifications
1C - Main components
1 - TRANSMITTER OVERVIEW
2 - NUMBERING
3 - PROGRAMMING
4 - OPERATION
5 - BATTERY ACCESS
1B - Technical specifications
Operating frequency 318 MHz
Number of keys: 1
Battery life: 18 24 months
Battery : 2 x 3V lithium batteries CR2016
÷
Number combinations : 65,536
Protocol : Linear compatible
Different Facilities codes 16
Operating temperature: -20°F÷+131°F (-20°C÷+55°C)
Overall dimensions: 2.4”x1.4”x0.51” (61x36x13 mm)
Weight: 0.49 oz. (14 gr.)
1C - Main components
Red
LED
Key
holder
ring
Blue
push-button
Transmitter
Solutions
Thank you for choosing a Transmitter Solutions product .
Please read this manual carefully before using the product.
Made in Italy. Copyright © 2006 by Transmitter Solutions
6 - TROUBLESHOOTING
Manual
MONARCH 318LIPW1K
Dark grey
case
Fig. 2
1A - General information
The Transmitter Solutions - Monarch 318LIPW1K transmitter is a key
chain style mini transmitter operating at 318 MHz. It has been designed
for use with programmable telephone entry, security, and access control
systems operating with a 318 MHz frequency receiver. The code sent by
the transmitter includes a 16 bit security code which allows up to
65,536 code combinations and 4 bits of facility code which allows up to
16 facility codes .
The Transmitter Solutions - 318R receiver which operates with this
transmitter has a Wiegand 26 bit output and can operate any type of
access control system equipped with the same protocol. The CR 2016
lithium batteries of the transmitter have a shelf life of about 6 months.
Part 15 of FCC Regulations andThe product fully complies with the
European Directives 99/5/CE, 89/336/CEE, 73/23/CEE.

Transmitter Solutions Monarch 318LIPW1K Specifications

General

Brand	Transmitter Solutions
Model	Monarch 318LIPW1K
Category	Receiver
Language	English

Summary

Monarch 318LIPW1K Transmitter Overview

General Information

Key chain style mini transmitter operating at 318 MHz for access control systems. Features 16-bit security code.

Technical Specifications

Details operating frequency, battery type, battery life, combinations, protocol, temperature, dimensions, and weight.

Main Components Identification

Identifies key physical parts of the transmitter including LED, case, button, and key ring holder.

Transmitter Numbering and Setup

Factory Serial Numbering

Each transmitter is supplied with a unique, factory-set serial number.

Programming Procedure

Requires programming into the system memory by an installer or reseller.

Transmitter Operation and Maintenance

Operating Instructions

Press button until LED illuminates, then release. Repeat if no response.

Battery Access and Replacement

Open case with screwdriver, replace CR2016 batteries respecting polarity. Dispose properly.

Troubleshooting and Compliance

Troubleshooting Common Issues

Addresses no signal, LED not lighting, and reduced range by checking programming and battery status.

FCC Compliance and Notice

States FCC compliance and warns against unauthorized modifications.

Product Warranty Information

Details a 24-month warranty against defective components, excluding case damage and battery life.

Monarch 318DOPW1K Transmitter Details

General Information

Mini transmitter at 318 MHz, MicroCLIK compatible, with 14-bit security code for 16384 combinations.

Technical Specifications

Lists frequency, battery, life, combinations, protocol, temperature, dimensions, and weight for this model.

Main Components

Illustrates the transmitter's key components including LED, case, button, and key ring holder.

Transmitter Numbering and Operation

Factory Serial Numbering

Confirms each transmitter has a unique, factory-assigned serial number.

Programming Instructions

Emphasizes the need for professional programming into the target system.

Standard Operating Procedure

Guides users on how to press the button and what to expect from the LED indicator.

Battery Access and Installation

Details the process for opening the transmitter to replace CR2016 batteries, stressing correct polarity.

Troubleshooting and Support Information

Troubleshooting Guide

Provides solutions for common problems like signal loss or non-functional LED.

FCC Regulations and Notice

Outlines FCC compliance rules and a disclaimer regarding modifications.

Warranty Terms

Specifies a 24-month warranty period and exclusions for physical damage and battery life.