TRAXION 3-100 User Manual

engineered products
0$18$/
Foldable Topside Creeper
0RGHO
Please read and understand all safety advisories and
operating instruction in this manual to ensure safe and
productive operation of your new Topside Creeper.
Safety First
WARNING: Failure to follow these safety requirements could result in personal injury.
This product is a tool to reach what are normally hard to reach places, such as the topside of an
engine compartment for mechanics.
Always inspect the product for damage before each use. Do not use if damage is detected. Make
sure all nuts and bolts are secure before each use.
Always engage the caster locks before using the Topside Creeper.
Always make sure the angle adjustment bar is secure in one of the three position slots before using.
Always face the Topside Creeper when climbing up or down. Use both hands and keep your body
centered between the rails.
DO NOT USE THE PRODUCT if you tire easily or are subject to fainting spells or disorientation.
DO NOT USE THE PRODUCT if you are taking medication that could impair judgement.
DO NOT USE THE PRODUCT if you are under the influence of drugs or alcohol.
DO NOT USE THE PRODUCT if you are physically challenged.
DO NOT sit or stand on the chest pad.
DO NOT overload the product. The maximum capacity is 400 lbs (180 kg) which includes body
weight, tools and torque applied to tools.
DO NOT use the Topside Creeper over a running engine.

TRAXION 3-100 Specifications

General

Brand	TRAXION
Model	3-100
Category	Ladders
Language	English

Summary

Safety First

General Safety Advisories

Lists critical safety requirements, warnings, and usage restrictions for preventing personal injury and ensuring safe operation.

Parts List

Assembly Instructions

Assemble Base

Details on assembling the base of the creeper, including attaching legs to the base using specified hardware.

Attach Casters

Instructions for securing both locking and non-locking casters to the assembled base structure.

Attach Climbing Section

Steps for positioning and securing the climbing section to the base using bolts and locknuts.

Attach Angle Adjust Keepers

Guidance on installing angle adjustment keepers to the base using bolts and lock nuts.

Attach Base Cross Bar

Procedure for attaching the square tube cross bar support to the base with bolts, nuts, and washers.

Attach Padded Deck Frame

Instructions for securing the chest frame to the climbing section using bolts and nuts.

Attach Tool Pouch

Steps for mounting the tool pouch bracket and pouch to the frame using screws and lock nuts.

Attach Padded Deck

Procedure for attaching the padded deck to the frame using screws that thread into the pad.

Attach Bumper Pads

Instructions for sliding the bumper pads onto the angle support bars and crossbar.

Operating Instructions

Adjustable Angle Lean-in Feature

How to adjust the creeper's lean-in angle using the base notches for optimal positioning.

Changing Working Height

Detailed steps to adjust the working height by releasing and re-engaging spring-loaded locking pins.

Folding Up The Topside Creeper

Guidance on folding the creeper for compact storage, including locking casters and adjusting the bar.