TRAXION Tailgate Ladder User Manual

Tailgate Ladder Parts
Tools Required:
Drill
#5 (9/64”) Drill Bit
#2 Phillips Head Screw Driver
Marking Pen / Center Punch
1/2” or 13mm wrench (with second
wrench or Crescent wrench)
Tailgate Ladder
This is a Patented Product
7401798
Instructions 5-100v7 140104
For online video instructions on how to install The Tailgate Ladder
visit the Tailgate Ladder product page at www.traxionproducts.com.
Or search for “tailgate ladder instructions” at www.youtube.com
Thank you for purchasing this Tailgate Ladder.
If you have any questions or comments please
visitour website at www.traxionproducts.com
or phone 479-474-3460.
B
C
D
E
K
G
H
J
I
1
L
F
Tailgate Ladder Parts List:
A. (qty 1) Mounting Plate with Rocker
Arms and NEW rubber bumpers
B. (qty 1) Offset Tube
C. (qty 1) Straight Tube
D. (qty 1) Climbing Section
E. (qty 1) Tie Down Strap with Male
Clasp
F. (qty 1) Tie Down Strap with Female
Clasp
G. (qty 2) 6mm Fender Washers
H. (qty 9) 3.5mm x 20mm Sheet
Metal Screws
I. (qty 9) 3.5mm x 45mm Sheet Metal
Screws
J. (qty 4) 4mm x 35mm Hex-head
Bolts
K. (qty 4) 4mm Lock Nut
L. (qty 2) Lock Pin
A
engineered products

TRAXION Tailgate Ladder Specifications

General

Material	Aluminum
Weight Capacity	300 lbs
Finish	Powder-coated
Type	Tailgate Ladder
Number of Steps	3
Color	Black
Compatibility	Fits most pickup trucks

Summary

Tailgate Ladder Parts and Tools

Tailgate Ladder Parts List

Lists all components included with the tailgate ladder, identified by letters A through L.

Tools Required for Installation

Details the necessary tools for installing the tailgate ladder, including drill, screwdriver, and wrenches.

Assembly Instructions

Attach Mounting Plate

Instructions for positioning and securing the mounting plate to the tailgate using sheet metal screws.

Attaching Side Tubes

Steps to attach the offset and straight tubes to the rocker arm channels using bolts and lock nuts.

Attach Climbing Section

Guidance on connecting the climbing section to the side tubes and adjusting for a 15-degree angle.

Attach Tie Down Strap

Procedure for securing the tie-down straps to the tailgate using sheet metal screws.

Strap Down

Final step to secure the tailgate ladder by tightening the tie-down straps.