Need help?Do you have a question about the Traxxas 57046-4 and is the answer not in the manual?
Information on contacting Traxxas for assistance and support options.
Overview of procedures to get your model running quickly.
Instructions for registering your product online for better customer service.
Explanation of icons used for warnings, helpful hints, and cross-references.
Contact information for Traxxas technical support via phone and email.
Key advice on propeller hazards, hot parts, water safety, and general operation.
Precautions for handling the powerful electronic speed control (ESC).
Essential safety guidelines for LiPo batteries and charging.
Guidelines for safe use, storage, and disposal of battery packs.
Legal terms and conditions regarding product use and liability.
Critical warnings about LiPo battery fire, explosion, and severe injury risks.
Detailed instructions for safe charging and handling of LiPo batteries.
List of tools and equipment included with the model.
Suggested tools and accessories for R/C toolbox.
List of essential items not included with the model.
Diagram labeling the main parts of the boat's hull.
Diagram labeling the components of the rear drive system.
Step-by-step guide to prepare your model for initial operation.
Definitions of key terms used in the radio and power systems.
Crucial advice for maintaining radio range and preventing interference.
Diagram of the transmitter and receiver with labeled controls and ports.
Diagram illustrating the wiring connections between ESC, motor, and batteries.
Diagram of the ESC showing water cooling and connectors.
Steps for installing AA batteries in the TQi transmitter.
Recommendations for LiPo batteries and power requirements.
Guidance on choosing the correct LiPo battery charger.
Explanation of the Traxxas Battery iD for automatic charger settings.
Instructions and diagrams for securing battery packs in the hull.
Guidance on battery placement for stability and speed.
Overview of transmitter controls like steering wheel and throttle trigger.
Essential rules for operating the radio system safely and effectively.
Instructions for adjusting throttle neutral and steering trim.
Procedure for checking and setting up the radio system for operation.
Steps for performing a range test to ensure radio signal reliability.
Procedure for binding the transmitter and receiver if needed.
Explanation and adjustment of Traxxas Stability Management (TSM).
Instructions for properly installing and maintaining the receiver antenna.
Technical specifications for the VXL-6s Marine speed control.
Steps to reset transmitter defaults for ESC programming.
How to set and verify Low-Voltage Detection for LiPo batteries.
Procedure for calibrating the ESC with the transmitter.
How to operate the speed control and test its programming.
Guide to selecting and changing ESC operating profiles.
Explanation of the ESC's over-voltage protection feature.
How the ESC prevents unintended throttle.
Tips for proper hull attitude, stability, and speed control.
Guidance on driving in different water conditions and making turns.
Description of propeller cavitation and how to address it.
Recommendations for selecting suitable bodies of water for operation.
Safe methods for retrieving a flipped or stranded model.
Tips for maximizing battery run time and performance.
How to adjust trim tabs for optimal hull attitude and stability.
How to adjust rudder angle for improved cornering feel and stability.
How to adjust drive strut height and angle for performance tuning.
Warning and setup for using NiMH batteries (not recommended).
Procedure for removing/installing radio gear while maintaining the watertight seal.
Routine checks for damage, wear, and loose connections.
Post-run maintenance procedures for motor and flex cable.
Procedure for re-centering the steering servo after removal or service.
Steps to remove the electronics tray for easier access.
Steps to remove the motor for maintenance or replacement.
What to do if the model stops running unexpectedly.
Troubleshooting issues with inconsistent power delivery.
Understanding and responding to Low-Voltage Detection activation.
Tips for improving the model's speed and performance.
Steps to reset the TQi transmitter to its factory settings.
Explanation of the safety feature to prevent runaway models.
How to adjust steering sensitivity using the Multi-Function knob.
How to adjust throttle sensitivity using the Multi-Function knob.
How to adjust steering throw percentage using the Multi-Function knob.
Using the Multi-Function knob for throttle trim adjustments.
Fine-tuning servo neutral positions.
Adjusting brake throw percentage (for cars/trucks).
Description of the built-in failsafe system for signal loss.
Setting servo travel limits to prevent binding.
Disabling the Multi-Function knob to prevent accidental changes.
How Multi-Function knob settings interact and overlay.
How to lock a receiver in memory to prevent deletion.
Procedure for deleting a model from transmitter memory.
Guide to navigating the transmitter's programming menu tree.
How to assign the knob to various functions like Expo, Dual Rate, Trim.
Using a mobile device with the wireless module for advanced tuning.
Displaying and logging real-time model data via sensors.
Organizing multiple models and settings within the app.
To Next Page
General