Need help?Do you have a question about the Traxxas 90076-4 and is the answer not in the manual?
General| Brand | Traxxas |
|---|---|
| Model | 90076-4 |
| Category | Motorized Toy Car |
| Language | English |
Information on how to contact Traxxas for assistance and available support options.
Overview of procedures to get the model running quickly, with references to other manual sections.
Instructions for registering the product online for better customer service.
Details on FCC rules and device compliance for radio frequency emissions.
Information regarding Canadian compliance with ICES-003 and RSS-210 standards.
Equipment compliance with RF exposure limits and minimum safe distance.
Contact details and resources for technical support and parts purchasing.
Explanation of icons used in the manual for warnings, tips, and cross-references.
Key safety guidelines for operating the model responsibly and preventing damage.
Precautions for the electronic speed control to prevent damage and ensure safe operation.
Encouragement to recycle NiMH batteries and information on the RBRC icon.
Critical warnings about the fire hazard associated with LiPo batteries and their handling.
Important warnings regarding LiPo battery usage, including low-voltage detection and handling.
Precautions for charging and handling all types of batteries to ensure safety.
List of tools and equipment provided with the model.
List of essential equipment that must be purchased separately for operation.
Optional tools and supplies recommended for an R/C toolbox.
Step-by-step guide for removing and reinstalling the model's body.
Instructions and tips for applying decals to the model for customization.
Definitions of key terms related to the radio system and power components.
Crucial warnings regarding antenna handling to maintain radio range and prevent damage.
Diagram illustrating the wiring connections between the ESC, motor, and battery.
Description of the TQi transmitter and receiver components and their functions.
Diagram showing how the electronic components are connected within the model.
Instructions for installing AA batteries into the TQi transmitter.
Guide to choosing compatible NiMH and LiPo battery packs for the model.
Recommendations for choosing the correct Traxxas charger for battery types.
Explanation of Traxxas Battery iD for automatic charger configuration.
Dimensions and height specifications for the model's battery compartment.
Steps for correctly installing the battery pack into the model.
Essential rules for operating the radio system safely, including power-on sequence.
Adjusting steering trim and multi-function knob for optimal control.
Procedure for checking and verifying radio system operation before driving.
Explanation of the built-in fail-safe function for signal loss prevention.
How to engage and use the reverse function for braking and backing up.
Procedure to test radio system range and ensure proper operation at a distance.
Steps for binding the transmitter and receiver if re-pairing is needed.
Instructions for correctly positioning the receiver antenna for optimal signal.
How to activate the self-righting feature to return an overturned model to its wheels.
Technical specifications for the Velineon VXL-3s electronic speed control.
How to check, activate, or disable Low-Voltage Detection for battery protection.
Procedure to reset transmitter settings to factory defaults before ESC programming.
Step-by-step guide for calibrating the ESC with the transmitter for proper operation.
Details on operating the VXL-3s ESC and testing its functions.
Guide to selecting different operating profiles (Sport, Race, Training) for the ESC.
Instructions for setting the ESC to Sport Mode (100% Fwd/Brake/Rev).
Instructions for setting the ESC to Race Mode (100% Fwd/Brake, No Rev).
Instructions for setting the ESC to Training Mode (50% Fwd/Brake/Rev).
Tip for quickly changing ESC modes using the EZ-Set button.
Explanation of ESC LED indicators for different operational states and protections.
Important safety and operational tips to keep in mind while driving.
Strategies to maximize battery run time and performance.
Information and precautions for operating the model in wet environments.
Steps to prepare the model for operation in wet or muddy environments.
Specific care instructions for the motor when running in wet conditions.
Post-run maintenance procedures after operating in wet or muddy conditions.
Procedures for removing and installing the receiver while maintaining the watertight seal.
How to properly set the gear mesh between the pinion and spur gears.
Steps for adjusting the toe angle of the front and rear wheels for handling.
Procedure for setting the camber angle of the front and rear wheels.
Guidance on selecting shock mounting positions for different driving conditions.
Tips for adjusting shock oil viscosity and pistons for optimal damping.
Steps for re-centering the steering servo before installing the horn or servo.
Checklist for inspecting the vehicle for damaged or worn parts.
Routine maintenance procedures for chassis, suspension, steering, and shocks.
Instructions for storing the model and transmitter, including battery removal.
Steps for removing the front and rear suspension assemblies from the chassis.
Adjusting camber gain by moving link attachments for stability and traction.
Modifying roll center to influence handling balance and traction.
Information on how gearing affects speed, temperature, and performance.
Warning about using proper length motor bolts to avoid internal damage.
Explanation of the ESC's protection against motor lock-up.
Tips for monitoring temperatures and cooling components for longevity.
Reiteration of LiPo battery risks and need for advanced user education.
Procedures for adjusting and refilling front and rear gear differentials.
Rear differential maintenance and refilling procedures.
Explanation of the center drive's function and factory fill viscosity.
Adjusting steering sensitivity via the Multi-Function knob for tailored response.
Adjusting throttle sensitivity via the Multi-Function knob for smoother control.
Setting steering travel limits via the Multi-Function knob for track-specific tuning.
Adjusting brake travel percentage via the Multi-Function knob.
Using the Multi-Function knob to set the throttle's neutral position.
Steps to reset all transmitter settings back to their factory defaults.
Explanation of the safety feature that prevents accidental throttle application.
Description of the radio system's fail-safe feature for signal loss.
Adjusting servo travel limits for steering and throttle to prevent binding.
Fine-tuning servo neutral position when the trim knob is insufficient.
How to lock transmitter settings to prevent accidental changes.
Understanding how Multi-Function knob settings overlay and interact.
Reference for transmitter LED patterns and their meanings.
Reference for receiver LED patterns and their meanings.
Explanation of how the transmitter stores and recalls model settings.
How to lock a model's settings in memory to prevent deletion.
Procedure for removing unwanted models from the transmitter's memory.
Guide to navigating the TQi transmitter's programming menu tree.
Detailed steps and formulas for adjusting various transmitter functions via the menu.
Using the Traxxas Link app with the wireless module for advanced tuning.
Overview of the app's user interface for controlling drive effects and settings.
Using sensors with the app to display real-time speed, RPM, and temperature.
How to manage multiple vehicle profiles using the Traxxas Link application.
To Next Page