Need help?Do you have a question about the Traxxas Ford RAPTOR and is the answer not in the manual?
General| Scale | 1/10 |
|---|---|
| Motor Type | Brushed |
| Speed Control Type | Electronic |
| Wheelbase | 12.75 inches (324mm) |
| Steering | Bellcrank |
| Body Material | Polycarbonate |
| Radio System | TQ 2.4GHz |
| Battery Tray | 7-Cell NiMH or 2-Cell LiPo |
| Suspension | Independent |
| Top Speed | 30+ mph (48+ km/h) |
| Battery Type | 7-Cell NiMH or 2-Cell LiPo |
| Terrain | All-Terrain |
| Water Resistance | Yes |
| Chassis Material | Composite Nylon |
Information on contacting Traxxas for support and available options.
A guide outlining the necessary procedures to get your model up and running quickly.
Explanation of icons used for warnings, helpful hints, and cross-references throughout the manual.
Contact details and resources for Traxxas technical support and service.
Instructions for registering the product online to enhance customer service.
Key safety advice for operating the model sensibly and responsibly.
Safety guidelines and precautions for the electronic speed control (XL-5) and motor.
Critical safety precautions for charging, handling, and storing Lithium Polymer batteries.
General safety guidelines applicable to all battery types used with the model.
Additional safety measures for charging, discharging, and storing batteries.
Lists the tools and parts included with the model and those required for operation.
Suggestions for optional tools to include in an R/C toolbox for maintenance.
Diagram identifying the key components and parts of the Traxxas Raptor model.
A step-by-step checklist covering safety, battery, antenna, and radio setup.
Procedures for checking servo operation, range testing, and preparing for driving.
Overview of the TQ 2.4GHz transmitter and its automatic frequency locking capabilities.
Definitions of key terms related to radio and power systems used in the manual.
Critical advice on antenna installation and handling to maintain optimal radio range.
Wiring diagrams for the XL-5 ESC, transmitter, and receiver components.
Step-by-step guide for installing AA batteries into the TQ 2.4GHz transmitter.
Instructions and warnings for safely charging the model's battery pack.
Information on Battery iD, charge progress indicators, and error code solutions.
Instructions for attaching and removing the vehicle's innovative clipless body.
Procedures for correctly installing the receiver antenna and tube for optimal reception.
Guide on how to properly install the battery pack into the model's chassis.
Key operating rules for the radio system, including power-on sequence.
How to adjust steering trim and reverse steering/throttle channels.
Steps for operating the transmitter controls and performing a radio range test.
Explanation of transmitter and receiver LED indicators for various modes and errors.
Instructions for binding the transmitter/receiver and information on the fail-safe function.
Detailed technical specifications for the XL-5 electronic speed control.
How to verify, activate, or disable Low-Voltage Detection for different battery types.
Steps to calibrate the ESC to the transmitter for proper throttle control.
How to select between Sport, Race, and Training modes and understand LED codes.
Important safety and operational advice before and during driving.
Tips for increasing run time and precautions for running in wet conditions.
Specific care for the motor when operating in wet or muddy conditions.
Instructions for maintaining the receiver box's watertight seal.
How to adjust the slipper clutch and select appropriate gearing.
Procedure for setting the gear mesh to prevent stripped gears.
Adjusting toe-in, camber angles, and fine-tuning the shocks for handling.
Steps to re-center the steering servo after removal or for calibration.
Checklist for inspecting damage and performing regular maintenance tasks.
Recommendations for proper storage of the model and its batteries.
To Next Page